Great for profile research and sampling

Gouge augers

Hand-forged of high-quality hardened steel by our professionals, and made to last: that best describes the gouge augers developed by Royal Eijkelkamp. These instruments minimise the distortion of a sample, which makes them suitable for profile research and sampling. The gouge auger is available in various lengths and diameters, extendable and non-extendable.

View products

Our products

(14)

One-piece gouge auger set - soft soils

Up to a depth of 1 metre
Perfect for rapid soil profiling
Non toxic high tensile strength steel

One-piece gouge auger set - hard soils

Up to a depth of 1 meter
Impact absorbing hammer included
Non toxic high tensile strength steel

Pürckhauer gouge auger set - hard soils

Up to a depth of 1 meter
Soil sampling/profiling in hard soils
Made according to Dr. Pürckhauer's principle

Two-piece gouge auger set - soft soils, bayonet

Up to a depth of 5 metres
Three gouge diameters: 20-30-60 mm
One-man operated bayonet connection

Two-piece gouge auger set - hard soils, conical screw thread

Up to a depth of 5 metres
Very sturdy high tensile strength steel
Stiff and sturdy conical screw connection

Gouge auger set for stepwise sampling

For profile research in higher penetration resistant soils
Environmental and archaeological soil research
Soil sampling above groundwater table

Gouge auger set for top layers

Maximum sample depth 25/60 cm
Extremely slim auger bodies; low friction
For medium hard to hard soils

Flap gouge auger for samplings to 2 m

Small and efficient
For sampling in dry or wet material
Also applicable for the food industry

Single gouge auger - hard soils

Drilling up to 1 metre depth
Non-toxic high tensile steel
Perfect for quick soil preparation

Single gouge auger - soft soils

Up to a depth of 50 centimetres
Perfect for rapid soil profiling
Non toxic high tensile strength steel

Percussion gouge bottom part - 1 m

Different variants with a length of 1 metre
For harder soils
With hardened cutting head

Gouge auger, bottom

Many different variants
Hand-forged from high-quality hardened steel
Ideal for profile research and sampling

Auger arable land - 25 cm

Maximum sampling depth 25 cm
Extremely narrow auger bodies; little friction
Non-toxic steel (not galvanised)

Mineral gouge auger

Maximum sampling depth 30/60 cm
For medium hard to hard soils
Extremely narrow auger bodies; low friction

Choosing the right gouge auger

Gouge auger sets are often used in profile research for surveying purposes, soil assessment and rootage surveys.

Standard gouge augers are suitable for use in soft soils such as peat, clay and sandy or disturbed soils.
Heavy-duty gouge augers have been developed for hard soils such as loam and stony soils. They are driven into the soils using a hammer.
The single type sets are suitable for topsoil research.
The bi-partite auger sets are used in soil research to a depth of 5 m, depending on soil structure and soil composition.

The longer the operational part is, the more sensitive it is to torsion. So the soil type is influential here. The most suitable diameter depends on the composition and the structure of the soil and the purpose of the research: in general, a smaller diameter is used in in soils with a fine or dense structure.

Get in touch with our specialists

Need advice choosing the right product for your application? Our specialist Joost is happy to help.

+ 31 313 880288 Call me sales@eijkelkamp.com Email me