The calcimeter measures the amount of calcium carbonate, or lime contents, in the soil. This is an important indication of the quality of the soil. Measure the carbonate content of a soil sample with the Royal Eijkelkamp calcimeter, created for the simultaneous research of 5 samples according to NEN-ISO 10693. Complete with Erlenmeyer flasks (10 pieces) and test tubes (160 pieces).
A good amount of calcium carbonate in the soil shows that the pH is good, and acidity is not too high. This is important information when researching the quality of soil. It shows that the conditions for soil life are good. The determination of carbonate content is an important step in the soil classification process, and research how suitable soil is for its intended use.
The calcimeter design
This calcimeter is suitable for use in a professional lab and made to be sturdy and durable. Where possible, vulnerable glass was replaced with synthetic materials. The design is stable and ergonomic, to ensure safe use of hydrochloric acid.
The calcimeter comes with reaction vessels and test tubes (without reagents). A reaction takes approximately one hour. Carbonates that are hard to dissolve, such as sea shells, take more reaction time.
Using the calcimeter
The quantity of sample needed is determined beforehand by treating a part of the sample with hydrochloric acid on a watch glass. The carbonate content is estimated on the basis of the extent and period of bubbling. Based on this estimate, the quantity of sample for the analysis is determined.
This calcimeter does not use a balloon to keep the CO2 separate from the water (to prevent any gas from dissolving in the water). This results in much more accurate measuring results. To ensure accuracy with repeated measurements, a series should be executed in a room where changes in temperature do not exceed 4°C. The reagents used must also meet the standards for analysis.
Note that other gasses may be released as well, for instance if the soil is polluted. The gas will then have to be purified first and the CO2 will have to be determined otherwise.
|Maximum number of samples||5|
|Measuring range||0 - > 200 g/kg|
|Measured parameters||Carbonate content|
|Reading accuracy||1 g/kg|
|Package size||146 x 62 x 59 cm|
Need advice choosing the right product for your application? Our specialist Michiel is happy to help.