PE tube

Description

Tubes made of polyethylene are certified according to KIWA BRL K563. PE is most commonly applied as transport ducts for groundwater samples. To prevent cross-contamination to other monitoring wells, the tube is only used once. The tube is compliant with physico-chemical requirements as laid down in the standard DIN 8072 and for KIWA BRL K563.

The PE tube is available in several variations:  

12.20.03 Tube 4 x 6 mm, 100 metres long

12.20.04 Tube 6 x 8 mm, 100 metres long
12.20.05 Tube 6 x 8 mm, 200 metres long
12.20.07 Tube 6 x 8 mm, 200 metres long, 30 rolls

12.20.08 Tube 8 x 10 mm, 100 metres long

12.20.13 Tube 10 x 12 mm, 75 metres long

12.20.14 Tube 10 x 13 mm, 200 metres long

12.20.16 Tube 12 x 16 mm, 50 metres long
12.20.16.01 Tube 12 x 16 mm, 50 metres long, 22 rolls

12.20.17 Tube 12 x 16 mm, 100 metres long
12.20.18 Tube 12 x 16 mm, 100 metres long, 12 rolls

12.20.20 Tube 16 x 20 mm, 50 metres long

Notes

• Will adsorb volatile substances (toluene, benzene) when stored near engines, plastic fuel canisters
• Limited stiffness for ball valve pump application (use HDPE hose 121505)
• Uptake and release of pollutants; replace hose with each new sample
• Not suitable for hot liquids