Redi-Flo2 (MP 1) submersible pump

Description

The Redi-Flo2 (MP 1) submersible pump is specially designed for purging and sampling of monitoring wells. Originally designed by Grundfos, Royal Eijkelkamp is now exclusive manufacturer of this unique groundwater pump. 

It’s the only pump in the world which can lift water up to 90 m above water level within a well with a diameter as small as 50 mm (2 inch)! 

This pump can be delivered with a re-usable PTFE tube, a low-cost LDPE tube, or no tube. 

The high capacity of this pump allows for quick purging of the measuring point. By setting a low pumping capacity the same pump can be used for sampling. The pump housing is completely made of stainless steel, which helps prevent contamination of the sample. 

The pump motor is controlled by an adjustable frequency converter. Thanks to the variable setting of the frequency, the capacity of the pump can be adjusted from 0 to 528.34 US gallons of water (2m³ )/hour. This results in a steady flow of anaerobe water.

Every measurement point must be purged before samples can be taken. The large capacity of the MP 1 pump ensures that the measuring point is quickly purged. By setting it at a lower pumping capacity, the MP 1 can also be used for sampling.

Built-in safeguards protect the Redi-Flo2 and the converter against overload. The actual frequency can be read from a display.

Applications

• Anaerobe sampling 
• Purging and sampling of monitoring wells
• Maximum lift of 295 feet (90 meters) of water 

Available variants

• 12.27.SF PTFE tube, 98 feet (30 m)
• 12.27.SG PTFE tube, 196 feet (60 m)
• 12.27.SH PTFE tube, 295 feet (90 m)
• 12.27.SL LDPE tube, 98 feet (30 m)
• 12.27.SM LDPE tube, 196 feet (60 m)
• 12.27.SN LDPE tube, 295 feet (90 m)
• No tube

Set contains
The set is delivered fully assembled:

• Submersible pump MP 1
• Cooling jacket
• Frequency converter 
• Tube of choice
• Cables
• Hose reel cart 
• Service kit