What are you searching for?
My quote
Mini Water Level Meter with start-stop system
Mini Water Level Meter with start-stop system

Water level meter mini - with start/stop system


This water level meter is perfect for measuring the water level. The meter gives a clear acoustic and light signal when it comes in contact with a liquid substance after which the depth can be easily read. This water level meter has a start/stop method to limit the drop in water level and can be used with the Royal Eijkelkamp peristaltic pump.

  • Start/stop system for the Eijkelkamp peristaltic pump, in order to limit the drop of water level
  • More accurate analyses 
  • Fewer soil particles into the filter pipe
  • Sound and light signal when you reach the water level
  • Easy to carry
  • Available in two variants


The water level meter is part of the standard equipment for measurement of groundwater level. It is provided with a stainless steel probe with a diameter of only 14 millimetres, which is connected to a measuring tape with centimetre graduation. The probe gives clear light and sound signals when the probe comes into contact with a conductive liquid. The user can lift the cable slightly to stop the signal. The depth can then be easily read via the measuring tape. The product is accurate to approximately centimeter.

The purpose of the start/stop method of preliminary pumping is to limit the drop in water level such that the inflowing water draws many fewer soil particles into the filter pipe, which will result in much more accurate analyses. This water level meter can be connected to the Royal Eijkelkamp peristaltic pump. 


  • Geohydrological research 
  • Water quantity research  

Standards and directives

  • The Dutch standard NEN 5744-2011 for the sampling of groundwater
  • The American standard EPA504-S95-504 low flow (minimal drawdown) groundwater sampling procedure
  • The international directive ISO 5667-11: 2009 sampling of groundwater (micro-purging section).

Available versions

  • 11.03.30 10 m with start/stop system
  • 11.03.32 30 m with start/stop system


Water level meter mini - with start/stop system
Battery life time 2 years
Diameter (D) and /or size (L*W*H) Sensor D 14 mm
Maximum measuring depth 10 m
Measured parameters Level
Measuring principles Conductivity
Power supply Battery, 9 volt DC
Product material Stainless steel, PVC, other material
Reading accuracy 1 cm
Registration type Manual
Rod or cable operated Cable
Package size 10 x 20 x 15 cm
Weight 600 g
Sandra van der Linden

Get in touch with our specialists

Need advice choosing the right product for your application? Our specialist Sandra is happy to help.