What are you searching for?
My quote
Soil coring kit for chemical soil research, 37mm diameter
Soil coring kit for chemical soil research, 37mm diameter

Soil coring kit - chemical soil research


The soil coring kit for chemical research, for establishing the presence of volatile components in the soil, is suitable for augering down to a depth of 16.4 feet (5 meters.) This kit allows sampling for environmental research of soil containing volatile components. The method employed meets the NEN 5743 standard.

  • According to USA EPA 5035A
  • Can be hammered in hard soils
  • Prevents loss of volatiles during sampling and transport
  • Undisturbed sampling
  • No hassle in the field with methanol


With our special coring kit, volatilization and oxidation of components in soil samples can be prevented as much as possible. This is due to the fact that during sampling, the sample is pushed into the sample tube, after which the tube is shut off. This will optimally prevent volatilization and oxidation of the soil sample. So, the sample under no condition comes in touch with synthetic material. This method meets the NEN 5743 norm (soil or sediment sampling with volatile components). You can also combine it with the methanol method. 

The sample has a volume of 7.6 fl oz (226 milliliters.) The set therefore also is suitable for the determination of volume percentages of humidity in samples from undisturbed soil. With this set it is possible to take samples to a depth of more than 16.4 feet (5 meters.)

The samples are taken with a small coring apparatus fitted with thin-walled stainless steel sample tubes. The sampling tubes are preferably pushed into the soil by hand, but a steel hammer with nylon heads can also be used.

After taking the sample, the sample tubes can be locked and cooled for transport to the laboratory. Here sub-samples can be taken from the sample tube, applying a small gauge or apple-corer. The samples can also be removed using an extruder. All the parts, except the caps, can be decontaminated over and over. After decontamination the equipment can be used again. Please note that this set is not suitable for stony soils. 


  • Soil sampling above and below groundwater table
  • Environmental soil research
  • Undisturbed sampling

Set contains

  • Edelman auger
  • Stainless steel soil coring apparatus with a number of sample tubes
  • Filling blocks and insulation plates
  • Bottom caps
  • Sample extruder
  • Maintenance material
  • Aluminum transport case


Soil coring kit - chemical soil research
Connection Screw thread
Maximum sample depth 22.9 feet | 7 m
Product material Stainless steel, iron, other material
Sample diameter 1.4 inch | 37 mm
Sample length 7.8 inch | 20 cm
Sample specification Undisturbed
Sample stored in Foil
Package size 46 x 10.6 x 9 inch | 117 x 27 x 23 cm
Weight 60.7 lbs | 27.54 kg
Kory Enneking

Get in touch with our specialists

Need advice choosing the right product for your application? Our specialist Kory is happy to help.