What are you searching for?
My quote
Water Level Meter On Frame
Water Level Meter On Frame
Water Level Meter On Frame
Water Level Meter On Frame
Water Level Meter On Frame
Water Level Meter On Frame

Water level meter on a frame

11.03.4

Thanks to its frame, this robust water level gauge is easy to carry and thus ideal to take along in the field. It is used for measuring the water level and is available in many lengths. This water level meter is equipped with sound and light signals.

  • Easy handling with its carrying frame
  • Sound and light signal when the probe reaches the water level 
  • Mobile device for fast, easy and solid measurement of the water level 
  • Small stainless steel electrode of 0.59 inches diameter
  • Easy to clean

Description

The water level meter is part of the standard equipment for measuring the groundwater level. This model has a strong and robust frame but is still easy to carry. The probe is made of stainless steel and is connected to a long measuring tape with centimeter graduations, for easy read-out of the levels.

The probe gives a sound and light signal when it touches a conductive liquid. If the cable is then lifted slightly, the signal stops and the depth can be read directly from the measuring tape (accuracy: ± 1 centimeter). Royal Eijkelkamp's Water level meter is available in various lengths. 

Available variations

  • 11.03.42.01 Range 98.4 feet (30 meters)
  • 11.03.43.01 Range 164 feet (50 meters)
  • 11.03.45 Range 328 feet (100 meters)
  • 11.03.46 Range 492 feet (150 meters)
  • 11.03.47 Range 656 feet (200 meters)
  • 11.03.48 Range 984 feet (300 meters)
  • 11.03.49 Range 1,640 feet (500 meters)

Applications

  • Water level measurements of electrically conducting liquids in boreholes, wells and tanks (in ATEX-free zones only) 
  • Long-term observations for periodic level soundings 
  • Continuous water level registration during pumping tests 
  • Additional sounding of well depths using the bottom sensor (accessory) 
  • Geohydrological research
  • Water quantity research

Specifications

Water level meter on a frame
Diameter (D) and /or size (L*W*H) Sensor D 0.59 in, L 7.67 in / Sensor D 15 mm, L 195 mm
Measured parameters Level
Measuring principles Conductivity
Power supply Battery, 4x 1,5 volt DC (AA) with 2 years lifetime
Product material Stainless steel and electroplated brass (easy to clean)
Safety class for probe IP 68, permanently pressure resistant
Safety class measuring tape IP 64, spray water resistant
Reading accuracy 0.4 in (1 cm)
Registration type Manual
Recommended storage temperature +41 °F up to +86 °F (+5 °C up to +30 °C), for battery protection