What are you searching for?
My quote
Hand-operated peristaltic pump - detail
Hand-operated peristaltic pump
Hand-operated peristaltic pump - detail
Hand-operated peristaltic pump

Peristaltic pump - hand operated


The hand operated peristaltic pump is used for water sampling, or pumping 0 - 1000 ml/min. This pump has a suction head up to 31.1 feet (9.5 meters.)

  • No cross contamination: exchangeable tubing 
  • Pumps air as well as water 
  • Monitoring well installation and water quality
  • Pressure allows perfect on-site 0.45-micron filtration


The hand-operated peristaltic pump is a very reliable apparatus that is used for pumping of gasses and fluids. This pump is a simple, but very durable, peristaltic pump with three pressure rollers. The bearings of the drive shaft and the pressure rollers are water resistant.  

The pump can deliver a pump pressure of 3 bar, which makes it suitable for use with in-line filters, and an under-pressure maximum of 1 bar. It is a self-priming pump. Even when the pump is out of use, the pump tube is completely pressed by at least one roller. Fluid and gas cannot flow back. 

Using the hand-operated peristaltic pump, water can be pumped from a depth of up to 31.1 feet (9.5 meters.) A 0.23 x 0.39-inch (6 x 10 millimeters) silicon tube is most suitable for groundwater sampling which is often used with 0.23 x 0.31 inch (6 x 8 millimeters) per tube.

The hand-operated peristaltic pump is fitted with a handle with bearings that operates very light. The stainless-steel monopod stand has been fitted with a press-down rim that allows you to press the stand into the soil easily for support. Please note that the hand-operated peristaltic pump is not suitable for purging. 


  • Monitoring well installation 
  • Infiltration research 
  • Water quality research 
  • Monitoring water quality 
  • Anaerobe sampling 
  • Water sampling 
  • Ground water sampling 


Peristaltic pump - hand operated
Fit for silt loaden water Yes
Maximum pumping capacity 1 l/min
Maximum sample depth 29.5 feet | 9 m
Power supply Manual
Sample diameter 0.16 inch | 4 mm
Weight 4.4 lbs | 2 kg
Kory Enneking

Get in touch with our specialists

Need advice choosing the right product for your application? Our specialist Kory is happy to help.