This Multisampler is used for undisturbed sediment core sampling in relatively soft sediment (with a cutting ring) and watery sediment (with ball valve).
With the Multisampler you can quickly and easily take undisturbed sediment samples in both wet, solid and fluid material. This standard set is rod-operated and suitable for application in water up to a depth of 5 metres. It is possible to sample at an accurate depth (without mixing with higher layers). Accurate mix sampling can be done during a procedure.
The samples are taken in a transparent tube, which allows you to immediately visually check the sample and make a clear profile description. The device is pushed into the sludge. To prevent compaction of the layers, a piston is kept in a stationary position in relation to the sludge. The piston can be operated directly with a rod, so that the sample can be pushed from the sampler into the sampling trough on site. The sampling tube can be quickly disinfected or changed, making it even easier to take samples. This set is supplied in a carrying bag with shoulder strap. Please note that the Multisampler is not suitable for hammering.
|Multisampler - rod operated, 5 m|
|Sampling diameter||40 mm, if ball valve 20 mm|
|Maximum sample depth||5 m|
|Product material||Stainless steel|
|Sample length||1 m|
|Sample stored in||Tube acrylic transparant|
|Tube diameter||ø 50 x 5 mm|
|Sample volume||1.14 l|
|Package size||150 x 22 x 25 cm|
Need advice choosing the right product for your application? Our specialist Kevin is happy to help.