This submersible pump set is suitable for sampling of monitoring wells of 30, 60 or 90 metres depth. It can be used for both purging and sampling of even narrow (50 mm or 2 inch in diameter ) monitoring wells.
The MP 1 / Redi-Flo2 submersible pump is specially designed for purging and sampling of monitoring wells. Originally designed by Grundfos, Royal Eijkelkamp is now exclusive manufacturer of this unique groundwater pump.
It’s the only pump in the world which can lift water up to 90 m above water level within a well with a diameter as small as 50 mm (2 inch)!
This pump can be delivered with a re-usable PTFE tube, a low-cost LDPE tube, or no tube.
The high capacity of this pump allows for quick purging of the measuring point. By setting a low pumping capacity the same pump can be used for sampling. The pump housing is completely made of stainless steel, which helps prevent contamination of the sample.
The pump motor is controlled by an adjustable frequency converter. Thanks to the variable setting of the frequency, the capacity of the pump can be adjusted from 0 to 2m3 /hour. This results in a steady flow of anaerobe water.
Every measurement point must be purged before samples can be taken. The large capacity of the MP 1 pump ensures that the measuring point is quickly purged. By setting it at a lower pumping capacity, the MP 1 can also be used for sampling.
Built-in safeguards protect the MP 1 and the converter against overload. The actual frequency can be read from a display.
Applications
Available variants
Set contents
The set is delivered fully assembled and contains:
| MP 1 submersible pump | |
|---|---|
| Power input | 1.3kW |
| Voltage | 3 x 220 V 400 Hz |
| Maximum current | 5.5 A |
| Motor protection | Built-in thermal switch |
| Water temperature | 0 °C to +35 °C |
| Discharge port | Rp 3/4 |
| Continuous operation | 500 hours |
| Package size | 120 x 80 x 100 cm | 47.2 x 31.4 x 39.3 inch |
Need advice choosing the right product for your application? Our specialist Sylvia is happy to help.
